Back to top

Bleeding Heart Tetra – Hyphessobrycon erythrostigma


Bleeding Heart Tetra

Tetras are amongst the most popular aquarium fishes. There are probably more than 150 distinct species of tetra from which the aquarist may choose and this includes a large number of visually stunning fishes that are bound to enhance any home aquarium.

Is the Bleeding Heart Tetra a good community fish? The Bleeding Heart Tetra should be considered to be an excellent community fish because it can live quite happily amongst a wide variety of other species. 

Key Facts

CategoryKey Facts
Common name(s)Bleeding Heart Tetra
Scientific nameHyphessobrycon erythrostigma
FamilyCharacidae
Originate fromUpper Amazon River Basin in Brazil, Colombia and Peru in South America
Care requiredEasy to care for and hugely popular
TemperamentPlacid, shoaling fish
Colour & FormAlmost translucent with a fine red stripe along the lateral line/spine, a red, almost heart-shaped dot just under that line beneath the start of the dorsal fin, a reddish tinge over the upper half of the eye and a slight hump on its back just to the rear of the dorsal fin
LifespanUp to 5 years
Adult sizeUp to 3 inches
DietOmnivorous – eat aquatic insect larvae in nature
Aquarium size24 inches in length or greater
Compatible withMost other Tetras, Barbs, Danios, Guppies and other livebearers, dwarf cichlids, smaller Gouramis, catfish and loaches
Avoid keeping withLarge and/or aggressive species
BreedingEasy if you put the fish in the right environment.
Water temp73 – 82 Fahrenheit (80 for breeding)
Water pH5.0 to 7.0 (6.0 for breeding)
Water hardness (dGH or dH)1 to 12 dGH (around 8 for breeding)

Origins of the Bleeding Heart Tetra

Tetras, as a “family” of fishes belonging to the biological family Characidae are found in nature in Africa, Central America and South America.

The Bleeding Heart Tetra originates from the Upper Amazon River Basin in Brazil, Colombia and Peru in South America. The majority of Bleeding Heart Tetras available to aquarists are captive-bred. 

Characteristics of the Bleeding Heart Tetra

As you can see, the Bleeding Heart Tetra is a beautiful, little fish which will grow to around 3 inches in the aquarium and live for around five years. 

The Bleeding Heart Tetra is a deep-bodied fish and takes the form of a tetragonal shape. The female, once gravid (carrying eggs) will become even more rounded and, at that stage, is easily distinguished from the male.

The Bleeding Heart Tetra is distinguished by being a light colour, almost translucent with a fine red stripe along the lateral line/spine, a red, almost heart-shaped dot just under that line beneath the start of the dorsal fin, a reddish tinge over the upper half of the eye and a slight hump on its back just to the rear of the dorsal fin.

The dorsal fin of the Bleeding Heart Tetra distinguishes the male from the female. Whilst the banded red, white and black colouring of the dorsal fin is similar in male and female, the dorsal fin of the male is longer and ends in a point.

The Bleeding Heart Tetra is omnivorous in the aquarium though, in the wild, it generally eats small, live aquatic insect larvae but also eats plants. In the aquarium, as well as consuming small flake food the Bleeding Heart Tetra will enjoy brine shrimp, freeze-dried bloodworms, daphnia and tubifex worms. In addition, the Bleeding Heart Tetra will benefit from pellet food, as most of these commercial foods include nutrients designed to enhance the vibrant colours of the fish. That said, the Bleeding Heart Tetra rarely ventures to the bottom of the aquarium.

The Bleeding Heart Tetra tends to inhabit the middle to lower half of the aquarium. That said, it is a vigorous fish, especially when breeding and will readily traverse the entire aquarium.

The Bleeding Heart Tetra is, by nature, a shoaling fish and it is generally recommended to purchase six or more fish, as their nature is to swim together as a shoal and they will tend to thrive much better as a shoal. Bleeding Heart Tetras are extremely peaceable and do not bully other species.

Bleeding Heart Tetras mix well with most other Tetras, Barbs, Danios, Guppies and other livebearers, dwarf cichlids, smaller Gouramis, catfish and loaches. 

It is generally advised that the minimum tank size for Bleeding Heart Tetras should be one of 24 inches in length or more, which will enable a small shoal to move around freely. A larger tank, 40 gallons or more, will enable a larger shoal of Bleeding Heart Tetras really to impress. The tank should be well-planted, preferably including dense foliage, in order to enable them to find cover and open space to enable them freely to swim.

Bleeding Heart Tetras prefer slightly acidic water in nature because, in the wild, this is their natural habitat which is under the canopy of the Amazon rainforest. In nature, the water will get relatively little light and will also tend to be tannin-stained due to the decomposition of leaf matter and this causes the water to be quite acidic. That said and because you are only likely to obtain tank-bred specimens, they are acclimated to neutral water so water condition is less critical than one might otherwise expect.

It is best to ensure that the aquarium is well planted, possibly with floating plants included to provide shade from the tank illumination and thus mimic the blackwater environment found in the natural habitat of the Bleeding Heart Tetra, despite the fact that you are unlikely to be able to obtain anything other than tank-bred specimens.

It is somewhat difficult to determine with certainty the sex of most Tetras. It is, however, easy to determine the sex of Bleeding Heart Tetras once a female is gravid (carrying eggs), as her belly becomes much more rounded and also because the dorsal fin of the male is longer and has a pointed tip.

The general rule for Tetras is that by keeping six or more of the same species in an aquarium they will be fully aware of which is male and which is female and they will act accordingly.

Most (but not all) Tetras have an additional fin which identifies them as being Tetras and the Bleeding Heart Tetra is no exception. If you look between the dorsal fin and the caudal (tail) fin of the Bleeding Heart Tetra you will observe a tiny, additional fin, known as the adipose fin. The purpose of this fin is not fully understood but, if it is present on a fish then you can be pretty certain that the fish is a Tetra.

Tetra comes from the Greek word “Tetragonopterus” which means square-finned and appears to relate to the four fins on vertical plane of the fish (dorsal, adipose, caudal and anal fins) which span the central line of the fish (when viewed from above or below, front or rear) and are not present as a pair (e.g. the pectoral fins).

Bleeding Heart Tetra – Video

How do Bleeding Heart Tetras breed?

Tetras, in general, will scatter eggs by laying them over fine plants such as Cabomba, Fontanalis or Java Moss.

As the female Bleeding Heart Tetra becomes ripe with eggs, the difference between the sexes is even more evident. If you plan to attempt to breed Bleeding Heart Tetras then it is recommended that you have a breeding tank prepared which will be unlit and well planted.

Whilst you can keep Bleeding Heart Tetras in community tanks with fairly neutral water, in order to optimize for breeding conditions it is far better to create an environment much closer to that of its natural habitat (i.e. fairly dark with soft, somewhat acidic and very soft water). That said, I have observed Bleeding Heart Tetras breeding readily and vigorously in quite neutral water. Nature finds a way!

The female will swim amongst the plants in which she will lay her eggs which will stick to the plants and the male will follow her or swim alongside her and fertilize (at least some of) the eggs as they are laid. Once spawning is complete, remove the adults, as they are likely to consume the eggs and take no further parental responsibility.

Breeding tank for Bleeding Heart Tetras

You should prepare an unlit tank of around 20 gallons in size with mature water. You may wish to consider covering most, if not all of the aquarium glass with card to maintain the dark conditions requires (perhaps including a viewing port which can be closed when not in use).

Ensure that there is plenty of fine vegetation (e.g. Cabomba, Fontanalis or Java Moss) in the tank. Bleeding Heart Tetras tend to breed in the early morning. The water should be at a pH of around 5.0 to 6.5, a dGH of 1 to 8 and, ideally around 80 degrees Fahrenheit.

You may wish to introduce mosquito larvae or bloodworm as an inducement to reproduction.

The female will swim amongst the plants, laying her eggs whilst the male will swim alongside or behind her and fertilize the eggs as they are laid. Typically, the female can lay several hundred eggs, which will stick onto the plants or fall to the bottom of the tank.

Once the female has scattered her eggs (perhaps 300 or more in a single spawning) and the male has fertilized at least some of them then both should be removed carefully from the breeding tank because neither will have anything more to do with the eggs but they may simply eat them.

Keep the lights off and the tank dark because the eggs and fry are particularly sensitive to the light.

The eggs will hatch typically in around 72 hours depending on tank temperature and conditions. Keep the tank unlit for the first week or so then gradually increase the lighting.

The newly hatched fry will firstly feed on their yolk sac but, once free-swimming, can be fed infusoria (particularly rotifers) and will also thrive on egg yolk during the first two to four weeks. It is worth mentioning that immediately after hatching, fry seem quite vigorous but will soon go into a resting state before they become free-swimming so please don’t mistake this initial stage as being free-swimming.

After around four days or so add baby brine shrimp. Once the fry are sufficient in size not to be treated as a snack then they can be introduced into the community tank where they will join the existing shoal. Before moving the adolescent fish into the community tank ensure that you have balanced the water temperatures to mitigate the risk of White Spot or other diseases being triggered.

Should your Bleeding Heart Tetras have a special diet for breeding?

Adult Bleeding Heart Tetras don’t need any particular inducement to breed. That said, it has been suggested that adding mosquito larva may encourage them, presumably because the addition of a new food may “fool” the fish into thinking that it is breeding time. 

Mike Wheeler

I started keeping freshwater tropical fish in 1972 and it has been something of a passion ever since. In this website, my aim is to build up an everyman's guide to help the everyday aquarist get the best from this inspiring and entertaining hobby.

Recent Posts